CTC Union ETU-01A - Page 78

Chapter 4. Control Port Operation
72
November 2001
Press ESC to the SNMP agent setup menu
<< SNMP Agent Setup Menu >>
1. Set the Agent Information.
2. Set Access Control Table.
3. Set Trap Receivers Table.
4. Set Community String. < Public >
5. Save Parameter to SNMP Card and Exit.
Enter 1-5 or Press "ESC" to previous menu.
Press 4 to set the community string.
<< SNMP Agent Setup Menu >>
1. Set the Agent Information.
2. Set Access Control Table.
3. Set Trap Receivers Table.
4. Set Community String. < Public >
5. Save Parameter to SNMP Card and Exit.
Enter 1-5 or Press "ESC" to previous menu.
=============================================
Input Community String.
Input String. (1 to 8 chars ) :
The default community string is “Public”. Enter the text string for
the community name up to 8 characters and press ENTER. The
agent setup menu will again appear.