CTC Union ETU-01A - Page 85

Chapter 4. Control Port Operation
79
November 2001
Press ESC.
Now we will select the Data Port for BERT testing. Press 2.
<< Bert Test Channel >>
Channel : E1
1. E1 Line
2. Data Port
Enter 1-2 or Press "ESC" to previous menu.
Enter 2, to select Data Port for testing.
<< Bert Test Channel >>
Channel : DATA
1. E1 Line
2. Data Port
Enter 1-2 or Press "ESC" to previous menu.
Press ESC. The Bert Test screen will show again.
<< Bert Test Parameter >>
Function : ON Channel : DATA
Pattern : 511 Error Insert : NONE
1. Function
2. Channel
3. Pattern
4. Error Insert
5. Result
Enter 1-5 or Press "ESC" to previous menu.