CTC Union ETU-01A - Page 84

Chapter 4. Control Port Operation
78
November 2001
Enter 2 to Start the BERT function.
<< Bert Test Function >>
Function : ON
1. OFF
2. ON
Enter 1-2 or Press "ESC" to previous menu.
Enter 1 to Stop BERT function. Note that pressing 2 and 1
repeatedly toggles the function on and off. Press ESC.
<< Bert Test Parameter >>
Function : OFF Channel : E1
Pattern : 511 Error Insert : NONE
1. Function
2. Channel
3. Pattern
4. Error Insert
5. Result
Enter 1-5 or Press "ESC" to previous menu.
To view the BERT results, press 5.
<< Display Bert Test Result >>
Rx Bit : 34078143
Rx Error Bit : 0
Rx Error Rate : 0.0e-00
Press "ESC" to previous menu or "SPACE" to review ,
"ENTER" to clear.