Chapter 4. Control Port Operation
77
November 2001
Press ESC and the status will again be displayed.
<< Define LoopBack Test Port >>
E1 Line Loopback : LOOPBACK OFF
Data Port LoopBack : LOOPBACK OFF
1. E1 Line
2. Data Port
Enter 1-2 or Press "ESC" to previous menu.
Press ESC to back out to the Define Test Mode menu. Press 2 to
select BERT test.
<< Bert Test Parameter >>
Function : OFF Channel : E1
Pattern : 511 Error Insert : NONE
1. Function
2. Channel
3. Pattern
4. Error Insert
5. Result
Enter 1-5 or Press "ESC" to previous menu.
To start BERT function with the above parameters, select item 1.
<< Bert Test Function >>
Function : OFF
1. OFF
2. ON
Enter 1-2 or Press "ESC" to previous menu.
To Next Page
Loading...
