CTC Union SHDTU03 - Chapter 4. Configuration with Keypad and LCD; Purpose; How to Use Key Pads

Chapter 4. Configure via Keypad and LCD
4-1
I. Purpose
This chapter provides information about configuration your SHDSL
NTU via the front panel LCD display and keypads.
Note: After you have completed all necessary settings for your SHDSL
NTU, make sure to write the new configuration to NVRAM by “write”
command and reboot the system for the of new configuration to take effect.
II. How to use key pads
The SHDTU03 is designed for user-friendly configuration with keypads
and LCD display without using PC or NB with VT100 terminal.
Key Pad Description
Exit/- Return to previous configuration menu.
Enter/+ Skip to next configuration menu or configure the item.
L Select other parameter in the same level menu.
R Select other parameter in the same level menu.