CTC Union SHDTU03 - View the System Configuration

Chapter 5. Configure via Console Port
5-27
X. View the System Configuration
You can use the status command to view the system configuration. Select
show and press [ENTER] or [RIGHT].
------------------------------------------------------------
setup Configure system
status Show running system status
>> show View system configuration
write Update flash configuration
reboot Reset and boot the system
diag Diagnostic utility
admin Setup management features
upgrade Software upgrade
exit Quick system
------------------------------------------------------------
To show system information, select system and press [ENTER] or [RIGHT].
The screen will prompt the system information.
------------------------------------------------------------
>> system Show general information
script Show all configuration in command script
------------------------------------------------------------
To show the system configuration, select script and press [ENTER] or
[RIGHT]. The screen will prompt the configuration in script type.
------------------------------------------------------------
system Show general information
>> script Show all configuration in command script
------------------------------------------------------------