CTC Union SHDTU03 - Changing the Password and User Profile

Chapter 5. Configure via Console Port
5-6
V. Changing the password and user
profile
The SHDSL NTU comes pre-configured with user profile 1 already
established, that is, user “admin” and password “admin” with menu driven
interface. The maximum number of user profile is limited to 5 users. You can
add, delete and modify the users in Admin menu.
For system security, suggest to change the default user name and
password by performing the following steps.
Step 1: Move the cursor to admin and press [ENTER] or [RIGHT].
--------------------------------------------------------------
setup Configure system
status Show running system status
show View system configuration
write Update flash configuration
reboot Reset and boot the system
diag Diagnostic utility
>>
admin Setup management features
upgrade Software upgrade
exit Quick system
--------------------------------------------------------------
Step 2: Choose user and press [ENTER] or [RIGHT].
---------------------------------------------------
>>
user Manage user profile
passwd Change supervisor password
---------------------------------------------------