45
SERVICE - 9
Front Lower Cover Repair
•Before removing the cover, elevate the front of the scooter on blocks, or
fold it, so that the front wheels are off the ground. This makes inspection
and replacement much easier.
•When removing the screws, start with those on the sides, and when replacing
them start with those in the middle. This makes it easier to set the cover
outer locking pins in place.
1.There are 9 holding screws at the bottom of the scooter front lower cover.
2.Remove the cover screws (12mm, 9pcs) and set them carefully aside.
3.Take off the cover.
※When reassembling, please follow the exact reverse sequence of these steps.
To Next Page
Loading...
