3. Safety warnings
It is recommended to read through this use and maintenance manual before starting to use the unit and to
become knowledgeable with the controls.
In case of need, contact only our Technical Service Department (in particular for component repair and
replacement).
Do not perform any repair operations. If repair operations are performed by unexperienced staff, the safety levels
of the unit may be altered.
Do not place anything on the unit; the unit is neither a support surface nor a means of transport.
Never arrange the connection pipes (A/C system) and feed pipes in such a position that they may interfere or
can be damaged.
For refrigerant recovery do not use containers (pressurised) unsuited to the purpose, both in terms of material
and pressure level.
Always comply with the regulations in force regarding hygiene and safety in the workplace. Always follow the
instructions given on the safety sheet. Never leave the unit unattended in the workplace, even if it is set to
automatic mode.
3.1 Working environment
The unit should only be used by adults and responsible persons. Do not allow children to activate the control
device.
Do not approach the unit with open flames or anything else that may cause overheating (with consequent risk of
fire) of the refilling circuit. Do not use the unit in places where there is a risk of explosion or fire.
Do not smoke in the place where the unit operates.
Operate the unit in well lit places.
Always work in a well-ventilated environment. Operate and store the unit in a dry place protected from atmos-
pheric agents (generally not in rough environmental conditions).
This manual contains essential safety rules for proper use of the unit: Wear safety goggles and gloves. Do not
expose to rain and direct sunlight. Read the owner’s manual of the vehicle to identify the type of refrigerant used
before using the unit.
To Next Page
Loading...