DECLARATION OF CONFORMITY
Directive 2006/42/CE “Machine Directive”
Directive 2014/30/UE “Electromagnetic Compatibility Directive”
Directive 2014/35/UE “Low Voltage Directive”
Directive 2014/68/UE “PED European Directive”
We: CTR S.R.L. Via T. ed E. Manzini n° 9, 43126 Parma (Italy) represented by its Legal Representative, declare on our sole
responsibility that the product:
Refill machine
Model: ASTRA PLUS
complies with the requirements of directive 2006/42/CE, 2014/30/UE and 2014/35/UE and associated implementation provisions.
Moreover the following technical standards have been applied:
• EN 61000-6-3: 2007 + A1:2011 – Electromagnetic compatibility (EMC). Part 6-3: Generic standards – Emission standard
for residential, commercial and light-industrial environments.
• EN 61000-6-2:2006 – – Electromagnetic compatibility (EMC) Parte 6-2: Generic standards – Immunity for industrial
environments.
At last the pressure circuit complies with directive 2014/68/UE as amended, and it is classified respectively:
• category II for the Astra Plus model.
We hereby specify that the maximum permissible limits for correct operation of the Astra Plus unit are:
• Maximum working pressure: 16 bar
• Maximum working temperature: +50°C
• Minimum working temperature: +5°C
We also point out that:
• the year of manufacture is indicated on the label (with CE marking) affixed onto the unit;
• the technical construction file is kept at our company by the legal representative.
The product has been certificated by the ICEPI S.p.A. Notified Body.
COMPONENTS INCLUDED IN THE PRODUCT
COMPONENT
PED CLASSIFICATION /
PROCEDURE OF CONFORMITY
EVALUATION
Recovery Compressor
Art.1.2j
Cylinder
II (Module D1)
Solenoid valves
Art.4 par. 3
Hoses and fittings
Art.4 par. 3
Safety valve
IV (Module B+D)
NOTIFIED BODY
NAME AND ADDRESS:
ICEPI SPA - Via Paolo Belizzi 29,31,33 - 29122 Piacenza (ITALY)
IDENTIFICATION NUMBER:
0066
CONFORMITY PROCEDURE:
Module A2
CE APPROVAL CERTIFICATION N°
15CPED0234
PARMA
22/03/2018
Ing. Aldo Adamo
(
General Manager
)
To Next Page
Loading...