INSTRUMENTS/CONTROLS
30
2. RANGE SHIFT LEVER
Move the range shift lever forward
to place the transmission in H range.
Move the lever rear ward to place
the transmission in L range.
Move the range shift lever forward
to place the transmission in H range.
Move the lever to the rearward to
place the transmission in M or L range.
The center position between M and
L or H and M places the transmission
in N.
3-1. SHUTTLE SHIFT LEVER The shuttle shift lever is used to
shift the transmission gear into
forward of reverse position. Move
the shuttle shift lever forward
(F position) to the forward position.
Move the shuttle shift lever rearward
(R position) to the reverse position.
The center position between F and
R places the transmission in N position.
(neutral)
3-2. REAR PTO CONTROL LEVER Move the lever forward to engage
the REAR PTO. Move the lever
rearward to disengage the Rear
PTO.
NOTE: Be sure the Rear PTO
control lever is in OFF slot when
starting the engine.
NOTE: Be sure the range shift lever
is in N (Engine start) slot when starting
the engine.
NOTE: Be sure the shuttle shift lever
is in N (Engine start) position when
starting the engine.
(GEAR DRIVE ONLY)
To Next Page
Loading...
Need help?
General