Cub Cadet Challenger 700 Operator's Manual

Periodic Maintenance and Adjustment 8-5
ITEM
ROUTINE
INITIAL
EVERY
Whichever
Comes first
Month
1
3
6
6
12
Miles
(Km)
200
(320)
750
(1,200)
1,500
(2,400)
1,500
(2,400)
3,000
(4,800)
hours
20
75
150
150
300
Wheel bearings*
●
Check bearing assemblies for looseness/damaged.
●
Repair if damaged.
○
○
○ ○
Stabilizer bushings* ● Check for cracks or damage.
○ ○ ○
Fittings and fasteners*
●
Check all chassis fittings and fasteners.
●
Check if necessary.
○ ○ ○ ○ ○
Rear upper and lower
knuckle pivots*
● Lubricate with lithium–soap-based grease.
● Lubricate with lithium-soap-based grease.
○
○
○
○
○
○
Drive shaft universal joint*
Steering system*
●
Check operation and for looseness/Replace if
damaged.
● Check toe-in/Adjust if necessary
○
○
○
○
○
Engine mount*
●
Check for cracks or damage.
●
Check bolt tightness.
○ ○ ○
Front and rear axle boots*
●
Check operation.
● Replace if damaged.
○ ○ ○ ○ ○

Cub Cadet Challenger 700 Specifications

General

Brand	Cub Cadet
Model	Challenger 700
Category	Utility Vehicle
Language	English