Cub Cadet Challenger 700 Operator's Manual

Auxiliary DC jack
The auxiliary DC jack is located at the right
side of the front panel. The auxiliary DC jack
can be used for suitable work lights, radios,
etc. The auxiliary DC jack should only be
used when the engine is running.
Control Functions 4-31
1. Auxiliary DC jack cap
1. Set the light switch to “OFF”.
2. Start the engine. (See pages 6-1 - 6-3.)
1. Auxiliary DC jack
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
Maximum rated capacity for the auxiliary
DC jack:
DC 12V, 120W (10 A)

Cub Cadet Challenger 700 Specifications

General

Brand	Cub Cadet
Model	Challenger 700
Category	Utility Vehicle
Language	English