4-2 Control Functions
Main switch
1. Main switch
Functions of the respective switch positions
are as follows:
ON:
All electrical circuits are supplied with power,
and the headlights and taillights come on
when the light switch is on.
OFF:
All electrical circuits are switched off. The key
can be removed in this position.
KEY：
Turning the steering wheel can lock the
steering wheel direction and the key can be
removed.
START:
The electric starter is engaged by turning and
holding the key in this position. Release the
key when the engine starts.
CAUTION:
● Do not operate the electric starter
continuously for more than 5 seconds at
a time or starter damage could occur.
Wait at least 5 seconds between each
start attempt.
● Do not turn the key to the “START”
position with the engine running, or
damage to the electric starter can result.
To Next Page
Loading...
