Cub Cadet Challenger 700

CONTROL FUNCTIONS
Combination switch
Light switch / / ”
1. Light switch / / ”
2. High beam switch
3. Low beam switch
4. Position lamp
5. Turning light switch
Control Functions 4-1
6. Emergency light button
● Set the switch to ”，to turn on the low
beam。
● Set the switch to ”，to turn on the high
beam。
● Set the switch to “OFF” to turn off all the
lights.。
● Set the switch to ”，to turn on the little
light in F/R headlights and taillights
L/R turning light switch
Place the L/R turning switch, the related turn
signal flash, and a buzzer may ring.
Emergency light switch
Press down the emergency light switch. Four
turning lights flash, and a buzzer ring.