Cub Cadet Challenger 700 Operator's Manual

8-56 Periodic Maintenance and Adjustment
Table 2：Solution of Common Problems in Brake System
S/N Problems Solutions
1
Locked braking system
1. Check whether brake disc plates are deformed or damaged.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly parts are deformed or damaged.
2
Brake performance
decreases
1. Check the disc brake pads for excessive wear.
2. Check the brake pads and rotor disc for excessive wear and
grease contamination. Clean or replace, if necessary.
3. Check brake fluid and refill if necessary.
3
Grinding noises from front
brake or brake rotor
become red during
operation due to heat.
1. Check brake rotor for excess wear.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly parts are deformed or damaged.
4
Grinding noises from front
brake or brake rotor
become red during
operation due to heat.
1. Check whether brake disc plates deformed or damaged.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly parts are deformed or damaged.
3. Check if rear brake is locked and will not release. Check if
the parking brake is in the “ON” position.

Cub Cadet Challenger 700 Specifications

General

Brand	Cub Cadet
Model	Challenger 700
Category	Utility Vehicle
Language	English