2-14 Safety Information
General Service
Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless, and deadly
gas.
Before cleaning, repairing, or inspecting, make certain all moving parts have stopped. Disconnect the spark plug wires and
ground against the engine to prevent unintended starting.
Check brake operation frequently as it is subjected to wear during normal operation. Adjust and service as required.
If equipped, the cooling system is under pressure. Never remove the radiator cap when the system is hot. Slowly turn the cap to
the first stop to release pressure before removing the cap.
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
Never tamper with the safety interlock system or other safety devices. Check their proper operation regularly.
Never attempt to make adjustments or repairs to the machine while the engine is running.
Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe operating
speed of the engine.
To Next Page
Loading...
