button on the display. This will also change
the displayed mileage from miles to
kilometers.
Clock time adjustment
Press the left button and hold for three
seconds and the clock goes into the hour
‘set’ mode.
1. Press the right button to set the hour.
2. Press the left button again and the clock
goes into the minute ‘set’ mode.
3. Press the right button to set the minutes.
4. Press the left button again and the clock
will exit the ‘set’ mode.
Control Functions 4-7
Four-wheel drive indicator ”
There are two 4WD indicators on the display
panel. The left 4WD indicator has a blinking
circle on the front axle when the unit is in
4WD. When the grey 4WD selector button is
pressed the “ 4WD ” function has been
activated. This position also indicates that
the 4WD is NOT locked. This allows the
wheels on the left and right sides to rotate at
different speeds to accommodate turning.
Differential gear lock indicator
The right 4WD symbol will show an ‘X’ over
the center of the front axle when the rear
differential is locked. To lock the differential
To Next Page
Loading...
Need help?
General
