4-26 Control Functions
Front and Rear Shock Adjustment(Option 2)
These shock absorber assemblies
contain highly pressurized nitrogen gas,
read and understand the following
information before handling the shock
Do not tamper with or attempt to open
the cylinder assemblies.
Do not subject the shock absorber
assemblies to an open flame or other
high heat source. This may cause the unit
to explode due to excessive gas
Do not deform or damage the cylinders
in any way. Cylinder damage will result in
poor damping performance.
POTENTIAL HAZARD
Improper shock absorber adjustment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor
handling and loss of stability, which
could lead to an accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorbers on
the left and right side to the same setting.
To Next Page
Loading...
