15-5
15. SERVICE THE ELECTRICAL SYSTEM
Sc2400 Operator’s Manual
■ Use a Booster Battery
●NEVER attempt to jump-start a frozen battery.
Warm it to 60°F (16°C).
●NEVER connect the negative (–) booster cable
to the negative (–) terminal of the discharged
battery. Connect to an appropriate grounding
point other than the discharged battery.
(A) Booster battery
(B) Battery on a disabled vehicle
(C) Positive (+) post of booster battery
(D) Positive (+) post of battery on a disabled
vehicle
(E) Negative (–) post of booster battery
(F) Other end of booster cable
1. Connect the positive (+) booster cable to the
positive (+) post on the booster battery.
2. Connect the other end of positive (+) booster cable to
the positive (+) post of the battery on the disabled
vehicle.
3. Connect the negative (–) booster cable to the negative
(–) post on the booster battery.
4. Connect the other end of negative (–) booster cable to
the metal frame of the disabled vehicle.
5. Start the engine of the disabled vehicle, and run the
engine for several minutes.
6. Carefully disconnect the booster cables by performing
the booster cables connection procedure in the reverse
order (disconnect the negative cable first, and then the
positive cable).
! WARNING! WARNING
(D)
(B) (A)
(F)
(E) (C)
3013737
To Next Page
Loading...
Need help?
General