7-3
7. OPERATE THE ENGINE
Sc2400 Operator’s Manual
1. Draw out the right and left segments of the
retractable seat belt from the retracted positions
on both sides of the operator's seat.
2. Connect both segments of the belt with the
buckle, being careful to avoid twisting of the belt,
adjust the belt length, being suitable for the
operator.
(A) Buckle
(a) Adjust the belt length
●If the retractable seat belt is situated far away
from the operator's abdominal area, a
dangerous situation can be present in the event
of an accident. ALWAYS ensure that the
retractable seat belt is in the lowest possible
position to the operator's abdominal area.
●The retractable seat belt must be used by the
operator only. NEVER use the retractable seat
belt for two or more persons or to hold an
object to the operator.
3. Remove foot from the forward and
reverse drive pedal and set the pedal
to the NEUTRAL position.
NOTE
●With the parking brake engaged, the forward and
reverse drive pedal is locked in the NEUTRAL
position.
4. Engage the parking brake securely.
■ Engage the Parking Brake
1. Fully depress the brake pedal.
2. Fully pull the parking brake lever backward to
engage the parking brake securely.
3. Remove foot and make sure that the brake is fully
locked.
NOTE
●Applying the parking brake engages the differential
lock at the same time.
(A) Brake pedal
(B) Parking brake lever
IMPORTANT: Avoid damage.
●NEVER step on the forward and reverse drive
pedal while the parking brake is engaged.
(A)
(a)
A3013712
! WARNING
! WARNING
3014916a
(A)
(B)
To Next Page
Loading...
Need help?
General