EasyManuals Logo

Cub Cadet Sc2400 User Manual

Cub Cadet Sc2400
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
14-7
14. PERIODIC SERVICE
Sc2400 Operator’s Manual
Check the Engine Oil Level
IMPORTANT: Avoid damage.
ALWAYS check the oil level before day's
operation. If the oil level is low, a serious engine
problem can occur.
ALWAYS check the oil level before operation.
ALWAYS check the oil level when the engine is
cold and not running.
ALWAYS maintain the oil level between the lower
and the upper marks.
ALWAYS shut the engine down and allow to cool
before adding the engine oil.
1. Park the tractor safely and securely.
2. Open the hood.
IMPORTANT: Avoid damage.
Prevent dirt and other contaminants from entering
the engine. Clean the area around the dipstick
before removing it.
3. Remove the dipstick. Clean the dipstick blade
with a clean paper towel or shop rag.
4. Insert the dipstick completely.
5. Remove the dipstick again.
6. Check the oil level on the dipstick. The oil level
should be kept between the lower and the upper
marks on the dipstick.
7. If the oil level is low:
(1) Remove the oil fill cap.
(2) Refill the specified oil until the oil level reaches
between the lower and upper marks.
(A) Dipstick
(B) Oil fill cap
(a) Upper mark
(b) Lower mark
NOTE
NEVER overfill the engine with oil.
8. If the oil level exceeds the upper mark, drain the
oil to a proper level.
9. Replace the dipstick.
10.Close the hood.
P3014912a
(B)
(A)
P3014911a
(A)
(a)
(b)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet Sc2400 and is the answer not in the manual?

Cub Cadet Sc2400 Specifications

General IconGeneral
BrandCub Cadet
ModelSc2400
CategoryTractor
LanguageEnglish

Related product manuals