Cubicon Single Plus - Page 36

CUBICON Single Plus User Manual
36
 Main> Filament
[1] Filament type
Selects filament.( ABS, PLA, TPU, user description)
[2] Start
Starts selected operation
[2] Stop
Stops current operation
[3] Unloading
Pulls out filament
[4] Loading
Puts in Filament
 Main > Utilities
[1] File Manager
Copies and deletes USB / inside memory file
[2] Motion
Starts selected operation
[3] Diagnostic
Decides malfunction presence with self-diagnosis
[4] LED & Sound
Adjusts LED color selection and volume
[5] Auto Level Test
Measures bed flatness
[6] System Log
Copies saved log