Culligan 9" - Standard Manual Regeneration

37
01021076
Standard Manual Regeneration
Screen Display Range Setting Description
SOFTENING
JAN-01-13 12:01P
N/A
1. From the HOME screen, press to view the main
menu.
1)INFORMATION
>2)MANUAL MODE
1–6
2. The screen displays the main menu. Press to se-
lect 2)MANUAL MODE.
MANUAL MODE
>REGEN NOW
Regen
Off
Regen
Now
Regen
Tonite
Bypass
3. The screen displays the manual regeneration menu.
Press or and then to change the setting.
REGEN NOW is the default.
REGEN OFF specifies the softener will not regenerate.
REGEN TONITE specifies that the softener will regener-
ate that night at 2:00 a.m. (or at the preset regeneration
time). The screen displays two status messages: SOFT-
ENING and REGEN TONITE.
BYPASS specifies a preset softener bypass time. Press
to select the total time the softener is in the bypass
state.
MANUAL BYPASS
OFF
Off, 30,
60, 90,
120,
180,
Manual
Bypass
4. The screen displays the manual bypass duration, in min-
utes. This specifies the total time the softener is to be in
the bypass state. Press or and then to
change the setting.
SOFTENING
JAN-01-13 12:01P
N/A
5. Press to display the home screen.