EasyManua.ls Logo

Culligan 9" - When and How to Bypass Your Water Conditioner; Bypass Valve

Culligan 9"
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
01021076
Normally, all water except outside lines passes through the water softener. There are times when the water
softener should be bypassed, using the Cul-Flo-Valv
®
Bypass, or a three-way bypass valve. You should
bypass:
1. If lines to outside faucets do not bypass the water softener, and you do not want to waste soft-
ened water on lawn sprinkling or other outside uses.
2. If you are going away on vacation and do not want the unit to recharge.
Bypass Valve
In the back of Culligan water softener is a Cul-Flo-Valv® Bypass valve. To bypass the unit, turn the blue
knob clockwise. To return to softened water service, turn the blue knob counter-clockwise.
Figure 22. Bypass valve.
Bypassed
To BYPASS, turn the blue knob clockwise (see directional arrow on end of knob) until the knob stops as
shown in Figure 22. DO NOT OVERTIGHTEN!
About 1-1/4”
Figure 23. Service valve.
Softened Water
To return to SERVICE, turn the blue knob counter-clockwise (see directional arrow on end of knob) until the
knob stops as shown in Figure 23. DO NOT OVERTIGHTEN!
When and
How to
Bypass
Your Water
Conditioner

Table of Contents

Other manuals for Culligan 9"

Related product manuals