These simple precautions, if followed, will help assure continued trouble-free service and keep your Culligan Water system
looking like new for years�
• Use only mild soap and warm water when cleaning the exterior of the conditioner� Never use harsh, abrasive cleaning
compounds or those which contain acid, such as vinegar, bleach and similar products�
• Important: Protect your water system and the entire drainline from freezing temperatures�
WARNING!
If your unit should freeze, do not attempt to disassemble it. Call your Culligan Dealer.
• Important: Culligan water systems are sold for use with potable water, only� If at any time the water becomes
contaminated, such as during a “boil water” situation, the operation of the water system should be discontinued until
it is verified that the water is again potable� To do this, turn the knob on the bypass valve to the bypass position�
Then, call your Culligan dealer to have your system sanitized before it is placed back into service�
• Do not place heavy objects on top of the salt storage tank or timer cover�
Following the manufacturer’s instructions regarding operation, maintenance and replacement requirements, including replacement
of filters if applicable, is essential for Culligan’s products to perform as advertised�
Should service, adjustment, or trouble-shooting information be needed which is not covered in this Owners Guide, or if you
have further questions, call your Culligan Dealer�
14
01040692 B 04/21
Care & Cleaning
To Next Page
Loading...
