Normally, all water except outside lines passes through the water softener� There are times when the water softener should
be bypassed, using the Cul-Flo-Valv
®
Bypass, or a three-way bypass valve� You should bypass:
1� If lines to outside faucets do not bypass the water softener, and you do not want to waste softened water
on lawn sprinkling or other outside uses�
2� If you are going away on vacation and do not want the unit to recharge�
Bypass Valve
In the back of Culligan water softener is a Cul-Flo-Valv® Bypass valve� To bypass the unit, turn the blue knob clockwise�
To return to softened water service, turn the blue knob counter-clockwise�
Figure 1� Bypass Position
Bypassed
To BYPASS, turn the blue knob clockwise (see directional arrow on end of knob) until the knob stops as shown in Figure 1�
DO NOT OVERTIGHTEN!
Figure 2� Service Position
Softened Water
To return to SERVICE, turn the blue knob counter-clockwise (see directional arrow on end of knob) until the knob stops
as shown in Figure 2� DO NOT OVERTIGHTEN!
To Bypass
About 3/8”
About
1-1/4”
A screwdriver shank may be used in the slot
as a lever for extra turning force if needed
17
01040692 B 04/21
When & How to Bypass Your System
To Next Page
Loading...
Need help?
General
