Flow Diagrams 5
Cat. No. 01016370
Flow Diagrams
Flow Diagram - Service Step (Home Position)
1. These diagrams illustrate the simplicity of the Brunermatic valve and positive control of flow direction.
2. Note that only diaphragm valves 1 & 4 are open and flow is directed to top of resin tank, through resin bed, out
bottom of tank into service line.
3. Pressure is directed to pilot valve which distributes pressure to other valves.
4. Pressure is also directed through the brine injector ports to the brining assembly in brinemaker, where proper
liquid level is maintained.
Pilot Strainer
Hard
Water
Inlet
Soft
Water
Outlet
Soft Water
Hard Wate
Brine
Resin
Supporting Bed
Injector
Sample
Cock
5
4
2
17
1
Position
Dial
SERVICE
Figure 1. Service
To Next Page
Loading...
