CULLMANN CUlight FR 36 C - Wireless Flash Shooting: Radio (2.4 G) Transmission; Master Unit Setting

39
Maximum Stroboscopic Flashes:
Wireless Flash Shooting:
Radio (2.4G) Transmission
• You can set up three slave groups for TTL autoash shooting.
With TTL autoash, you can easily create various lighting effects.
• Any ash settings for the slave units on the master ash in TTL
mode will be automatically sent to the slave units. So the only
thing you need to do is to set the master unit for each slave group
without any operation for the slave units at all during the shooting.
• This ash can work in TTL / M / Multi / OFF ash modes when
set as a master unit.
The CUlight FR 36C ash unit is fully compatible with other items
from the CULLMANN CUlight product range.
As a master unit, CUlight FR 36C can control the following slave
unit models: CUlight FR 60C, CUlight RR 500C
As a slave unit, CUlight FR 36C can be controlled by the follow-
ing master unit models: CUlight FR 60C, CUlight RT 500C
• Even with multiple slave units, the master unit can con-
trol all of them via wireless.
• In this user manual, “master unit” refers to the camera
ash on a camera and “slave unit” will be controlled by
the master unit.
1. Wireless Settings
You can switch between normal ash and wireless ash. For nor-
mal ash shooting, be sure to set the wireless setting to OFF.
Master Unit Setting
1
Long Press the < SYNC >
button for 2 seconds so that
< > is blinking. Turn the
Select Dial until the < >
is displayed on the LCD pan-
el, which means the mas-
ter unit.