43
Slave/Master Unit‘s Positioning and Operation Range
Autoash Shooting with One Slave Unit
• Use the supplied mini stand to position the slave unit.
• Before shooting, perform a test ash and test shooting.
• The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the sur-
rounding environment and weather conditions.
Transmission distance is about 30m.
Wireless Multiple Flash Shooting
You can divide the slave units into two or three groups and per-
form TTL autoash while changing the ash ratio (factor). In ad-
dition, you can set and shoot with a different ash mode for each
ring group, for up to 3 groups.
• Auto Shooting with Two Slave Groups
• Auto Shooting with Three Slave Groups
To Next Page
Loading...
