46
Wireless Flash Shooting:
Radio (2.4G) Transmission
Using a ash (master/slave) with a radio transmission wireless
shooting function make it easy to shoot with advanced wireless
multiple ash lighting, in the same way as i-TTL autoash shoot-
ing. The basic relative position and operation range are as shown
in the picture. You can then perform wireless i-TTL autoash
shooting just by setting the master unit to <i-TTL>.
Positioning and Operation Range (Example of wireless ash
shooting)
• Autoash Shooting with One Slave Unit
Transmission distance
is about 100m.
• Use the supplied mini stand to position the slave unit.
• Before shooting, perform a test ash and test shooting.
• The transmission distance might be shorter depending
on the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Wireless Multiple Flash Shooting
You can divide the slave units into two or three groups and
perform i-TTL autoash while changing the ash ratio (factor). In
addition, you can set and shoot with a different ash mode for
each ring group, for up to 5 groups.
• Auto Shooting with Two Slave Groups
FR60X_Nikon 171010.indd 46 10.10.2017 17:14:05