CULLMANN CUlight FR 60S - TTL Flash Mode; FEC: Flash Exposure Compensation

40
TTL Flash Mode
This ash has three ash modes: TTL, Manual (M), and Multi
(Stroboscopic). In TTL mode, the camera and the ash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available:
FEC, HSS, second curtain sync, etc.
* Press < MODE > Mode Selection Button and three ash
modes will display on the LCD panel one by one with each
pressing.
TTL Mode
Press < MODE > Mode Selection Button to enter TTL mode.
The LCD panel will display.
• Press the camera release button halfway to focus. The
aperture and effective ash range will be displayed in the
viewnder.
• When the shutter button is fully pressed, the ash will re a
pre-ash that the camera will use to calculate exposure and
ash output the instant before the photo is taken.
FEC: Flash Exposure Compensation
With FEC function, this ash can adjust from -3 to +3 in 1/3rd
stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the environment.
Setting FEC:
1
 Press Function Button 2
<
>. The icon
<
> and ash exposure
compensation amount will
be highlighted on the LCD
panel.
2
 Set the ash exposure
compensation amount.
• Turn the Select Dial to set
the amount.
• “0.3”means 1/3 step,
“0.7”means 2/3 step.
• To cancel the ash expo-
sure compensation, set the
amount to “+0”.
3
 Press <SET> button again
to conrm the settings.
R
R
616x0_CUlight_FR60X_BDA_Sony englisch.indd 40 24.10.2016 13:59:18