44
Flash
output
1 2 3 4 5 6-7 8
1/4 7 6 5 4 4 3 3
1/8 14 14 12 10 8 6 5
1/16 30 30 30 20 20 20 10
1/32 60 60 60 50 50 40 30
1/64 90 90 90 80 80 70 60
1/128 90 90 90 90 90 90 80
Hz
Flash
output
10 20-50 60-199
1/4 2 2 2
1/8 4 4 4
1/16 8 8 8
1/32 20 16 12
1/64 50 30 20
1/128 70 40 40
Hz
Maximum Stroboscopic Flashes
Wireless Flash Shooting:
Optic Transmission
This product is compatible with Sony Wireless Lighting
System (WL). It can function as either an optical wireless
master or slave ash. As a master unit, it can control
Sony camera ashes e.g. HVL-F60M, HVL-F43M and HVL-
F32M via wireless. As a slave unit, it can be controlled by
wireless signals of Sony camera ashes e.g. HVL-F60M,
HVL-F43M and HVL-F32M.
For the restrictions of Sony camera ash’s wireless protocol,
there are several points to be noticed:
• Master unit only has TTL and OFF mode. And M ash mode
can only be set under the slave mode.
• Optical wireless lighting system (WL) do not have Multi mode.
• When setting the slave unit to M mode, plese set the group of
the master unit to TTL mode.
Slave/Master Unit’s Positioning and Operation Range
Indoors
Outdoors
• Even with multiple slave units, the master unit can
control all of them via wireless.
• In this user manual, “master unit” refers to the camera
ash on a camera and “slave unit” will be controlled by
the master unit.
616x0_CUlight_FR60X_BDA_Sony englisch.indd 44 24.10.2016 13:59:18
To Next Page
Loading...
