CULLMANN CUlight FR 60S - ZOOM: Setting the Flash Coverage and Using the Wide Panel; Using the Wide Panel; Low Battery Warning; Factory Settings

53
ZOOM: Setting the Flash Coverage and
Using the Wide Panel
The ash coverage can be set automatically or manually. It can
be set to match the lens focal length from 20 mm to 200mm.
Also, with the built-in wide panel, the ash coverage can be
expanded for 14mm wide-angle lenses.
In Manual Zoom mode, press
the <ZOOM/C.FN> button.
• Turn the Select Dial to change
the ash coverage.
• If <
A
> is displayed, the
ash coverage will be set
automatically.
• If you set the ash coverage manually, make sure it
covers the lens focal length so that the picture will not
have a dark periphery.
Using the Wide Panel
Pull out the wide panel and place
it over the ash head as shown.
The ash coverage will then be
extended to 14 mm.
• The catchlight panel will come
out at the same time. Push the
catchlight panel back in.
• The < ZOOM/C.FN > button
will not work.
Low Battery Warning
If the battery power is low,
<
> will appear and blink on
the LCD panel. Please replace
the battery immediately.
Factory Settings
To restore the ash to factory settings keep pushed the function
buttons 2 and 3 together for a short time.
616x0_CUlight_FR60X_BDA_Sony englisch.indd 53 24.10.2016 13:59:27