50
• Slave/Master Unit’s Positioning and Operation Range
Autoash Shooting with One Slave Unit
Transmission distance is
about 100m.
• Use the supplied mini stand to position the slave unit.
• Before shooting, perform a test ash and test shooting.
• The transmission distance might be shorter depending
on the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Wireless Multiple Flash Shooting
You can divide the slave units into two or three groups and
perform TTL autoash while changing the ash ratio (factor). In
addition, you can set and shoot with a different ash mode for
each ring group, for up to 3 groups.
• Auto Shooting with Two Slave Groups
• Auto Shooting with Three Slave Groups
Wireless shooting using radio transmission has advantages over
wireless shooting using optic transmission, such as being less
616x0_CUlight_FR60X_BDA_Sony englisch.indd 50 24.10.2016 13:59:25
To Next Page
Loading...
