22 | JetScan
®
MPX 8200 strapping and corner module | Daily cleaning procedures
Daily cleaning procedures
See the JetScan MPX 8200 user guide for additional cleaning procedures.
Daily cleaning is required to ensure maximum productivity and reliability. In some
instances, it may be necessary to perform these procedures more than once a day.
Recommended cleaning materials
The following cleaning materials are recommended:
Simple Green, the recommended cleaning agent, can be an eye
irritant. Avoid eye contact.
Ifeyecontactoccurs,usheye(s)withcoolwaterfor5minutes
– remove contact lenses if present – continue ushing eye(s)
withcoolwaterfor15moreminutes.Ifirritationpersists,consult
physician.
Individuals with sensitive skin should rinse hands after using.
•SimpleGreenSafetyTowels. (Part number: 022-2118-00.) A pre-moistened
microbertowelalsomaybeused.IfusingSimpleGreenconcentrate,
diluteto1ounce(30ml)ofSimpleGreenper8ounces(240ml)ofwater.
See simplegreen.com for safety data sheets.
•Microbertowels. (Part number: 022-2223-00.)
•Non-chemicallytreatedminidusters.(Partnumber:022-2224-00.)
•Vacuum.(Standardvacuumpartnumber:022-1959-00;heavy-dutyvacuumpart
number: 022-1308-00.)
Daily cleaning procedures
Risk of injury.
Press MPX 8200 master power switch OFF before cleaning any
automatic-strapping module and any corner module.
Do not defeat safety interlock switches.
To avoid machine/component damage and potential voiding of
existing warranty, follow these procedures:
Onlyusespeciedtoolsforcleaningmachine.Neverusemetal
tools.
If using Simple Green concentrate, dilute to 1 ounce (30 ml) of
SimpleGreenper8ounces(240ml)ofwater.
Neverusecleanerscontainingammonia.
Neverspraycleanersdirectlyonmachinecomponents.