CUMMINS ALLISON JetScan MPX 8200 - Maintaining Bins

Maintaining bins | JetScan
®
MPX 8200 strapping and corner module | 7
Maintaining bins
Empty the strapped-note collection bin when:
•Onebinisfull.
•Twobinsarefull,andthemachinestopsprocessing.Emptybothcollectionbinsto
continue operation.
Toemptyafullbin:
1. Locate the full bin:
•TheAlert:Strapperbinlimitreached! screen identies a full bin in green, as
shown below.
•Agreenlightalsoilluminatesonthetopofthebinthatisfull.
2. Remove the full bin and empty its contents. The top
of any strapping module can be used as a work
surface.
3. Return the empty bin to the strapping module.
A warning message appears on the main-
processing screen if the empty bin is not
completely inserted into the strapping module.
4. Press OK on the Alert:Strapperbinlimitreached!screen. OK may be pressed
before or after any full bin is removed and emptied.
2
4