CUMMINS ALLISON JetScan MPX 8200 User Manual

8 | JetScan
®
MPX 8200 strapping and corner module | Maintaining paper rolls
Maintaining paper rolls
Toremoveanexistingpaperrolloranemptypaper-rollcorefromastrappingmodule:
1. Open the upper-front access door and lower paper-roll access door.
Burn hazard. Hot surface below strap head.
Do not touch.
See the Strap head section for more information.
2. Disengage the loose end of the
strapping paper from the strap head by
doing one of the following:
a. Turning the top, small feed roller
counter-clockwise.
b. Turning the bottom, large feed roller
clockwise.
3. Gently pull the vertical section of
strapping paper along the inside, right
wall of the cabinet so it is completely
free of all guides.
4. Wind the paper roll in a counter-
clockwise direction, until the paper is
free from the paper path and
completely wound around the paper
roll, as shown at right.
5. Pull the paper roll or empty core off
the paper-roll shaft.
6. Set the paper roll aside or discard the
empty core.
Toloadanewpaperrollonastrapping
module:
1. Open the upper-front access door and
lower paper-roll access door.
2. Firmly push the paper-roll core onto
the paper-roll shaft until it stops,
making sure it is inserted so the paper
unwinds in the clockwise direction.
2a
4
2b
Strap
head
2

CUMMINS ALLISON JetScan MPX 8200 Specifications

General

Brand	CUMMINS ALLISON
Model	JetScan MPX 8200
Category	Packaging equipment
Language	English