8 | Single-pocket JetScan
®
currency scanner | Getting started
Operatingmodes
Pressing MODE from the main screen displays all modes that have been enabled in
SETUP and are available for use. The following screen shows all modes enabled.
Modekey Description
STRANGER
Scans for the rst denomination processed, which is the
target, and stops when another denomination is found.
When the machine encounters a different denomination, it
is called a stranger. A grand total is provided.
MIX
Scans all denominations without presorting. A grand total by
denomination is provided.
SORT
Scans all denominations and stops when a denomination
change occurs. Best used when notes are presorted by
denomination and then stacked together. A grand total is
provided.
OFFSORT
Scans notes of all denominations and stops for the
selected target denomination. When a note is different than
the target denomination, the machine stops and displays
DENOMINATION CHANGE. Remove notes from the pocket,
and the machine automatically continues processing. A
grand total of all notes processed is provided.
COUNT
Counts any type of media that complies with document size
and density-setting specications. This mode only counts
pieces; note scanning does not occur.
To Next Page
Loading...
Need help?
General
