Diesel Engine Complete Engine
54
Lubricating Oil Pump
Remove the five capscrews and the lubricating oil
pump.
Idler Gear
Remove the capscrew, retainer plate, and idler gear.
NOTE: If a PTO is installed, the idler gear uses a
bearing.
Camshaft Assembly
Remove the two mounting capscrews through the
casting holes in the camshaft gear.
Remove the thrust plate and camshaft assembly.
NOTE: When removing the camshaft, lightly rotate
the shaft while being careful not to damage
the bushing.
00900183
00900184
00900185
00900186
To Next Page
Loading...