18
TURNING ON
Unblock the machine by turning the STOP key (12) clockwise. Switch the
machine on by pressing the ON/OFF key (11). After a few sec the display
(1) will present the top plate temperature and the display (3) the
bottom plate temperature.
SETTING THE PLATE TEMPERATURE
To set the top plate temperature, press either key (5) or (6); the display (1)
will begin to flash; press key (5) or (6) up until the desired temperature has
been achieved. To set the bottom plate temperature, press either key (7) or
(8); the display (3) will begin to flash; press key (7) or (8) up until the desired
temperature has been achieved.
N.B. The temperature which has been set at the time the machine is
switched off, will be automatically saved and proposed once again when the
machine is switched on again.
SETTING THE PLATE CONTACT TIME (Dwell Setting)
To set the plate contact time, press key (10); the display (1) will begin to flash
and the set time will be displayed; press keys (5) and (6) up until the desired
time has been achieved.
To Next Page
