12
Stage 2
GRP edge trims
D260/D300 - Fillet Trim
TheDtrimisallettrimforuseagainstabuttingwalls.Itwillalsoprovideexpansionand
perimeter ventilation and is compatible with C2 left and right and C3 internal and external
corners. Place the D trim against the vertical face and push down diagonally into the corner
untilthetrimtssnugly.WheretheDtrimneedstobejoineditshouldbeoverlappedand
bonded with adhesive and bandaged together.
TRIM DETAILS:D260:Anglellettrimwith135and70mmtrimanges.D300:Anglellet
trimwith175mmand70mmanges.
F150/F300/600/900 - Flat Sheeting
TheFtrimisaatashing,whichcanbeusedasalayboardattheintersectionofapitched
roofandatroofoftenfoundondormersandtofabricateguttersinsitu.TheFtrimshould
not be laminated over completely as it may crack. It is nailed or stapled to the deck and bent
up the roof slope. In this situation, the F trim also acts as an expansion facility and must only
bexedtothedeckalongthebottomedge.TherearemanyotherapplicationsfortheFtrim
including vertical details where laminating would be time consuming, under the feet of air
conditioningunitstoenablere-roongwithoutdisconnectinganduseonsomeparapetwall
details etc. The trim should be nailed to the deck around its edges and bandaged over any
joins or nail penetrations. Any unlaminated trim can be topcoated with the rest of the roof.
Laminate onto the mat side only.
TRIM DETAILS: F150/F300/600/900: Flat sheeting supplied in 150, 300, 600 and 900mm
widths in 20M rolls. F300 Also available in 3M + 10M rolls.
D260/D300 Application Diagrams
F300/600/900 Application diagrams
Brick
35mm Channel
C100MT
GRP Layer and bandage
Decking
25mm Gap
D260
Decking
Laminate and bandage
F300 laid well
under roof felt
Roof felt
Final coarse of tiles
Joists
Laminate is laid over
the edge of the F300
Therstrunoftilesis
replaced over the F300
Sarking felt
overlaps
the F300
25mm gap to allow for
expansion of the decking.
The D trim is pushed right up
tothewallbeforebeingxed
to the deck and not the wall.
The D trim remains
unattached behind
the C100.
Bond with trim adhesive