Current Tools 8845 User Manual

FLOOR MOUNT
The Model 8045 Floor Mount is made to fit the Current Tools Model 88
Cable Puller. The floor mount is to be mounted only to a concrete floor
using the method described below.
Safety Information
1. ALWAYS mount to a smooth, flat
concrete floor with a minimum
3000 psi rating.
2. Mount only to a concrete floor.
NEVER
mount to cinder blocks, brick, etc.
3. Wedge anchors must be at least 12” away from edge of concrete.
4. ALWAYS use new anchors. NEVER REUSE ANCHORS.
5. Use only 5/8” x 6” wedge anchors or equivalent with a tension
and shear rating of 2,500 lbs. (Current Tools part #8045-3)
6. ALWAYS wear eye protection when installing anchors.
14
CAUTION
Current Tools
place close to conduit
ALWAY
S
p
lace the floor mount close to the conduit. This will reduce the
possibilit
y
of in
j
ur
y
should the rope break. See Figure 6B
.
W
ARNIN
G
Figure 6A
Figure 6B

Current Tools 8845 Specifications

General

Brand	Current Tools
Model	8845
Category	Power Tool
Language	English