INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Loosely attach hitch to vehicle tie down brackets using the
supplied 1/2" hardware and SP12 spacers, as shown.
4. Secure exhaust hanger brackets and hitch to frame using
the supplied M8 fasteners and 3/8" conical tooth washers.
5. Torque all M8 fasteners to 24 ft-lbs and all 1/2" hardware
to 110 ft-lbs.
6. Install is complete.
To Next Page