Do you have a question about the Curt Manufacturing 31048 and is the answer not in the manual?
Critical warning not to exceed the vehicle manufacturer's recommended towing capacity.
Specifies estimated installation time and difficulty level for the hitch.
Lists the necessary tools required for the hitch installation.
Provides advice for a successful installation and where to get help.
Remove front stabilizer bar bushing retaining bolts, saving them for reinstallation.
Slide driver side plate between frame and bushing bracket; reinstall 12mm bolts loosely.
Slide passenger side plate between frame and retaining bracket; reinstall 12mm bolts.
Drill a 1/2" hole in the frame and use fishwire to guide the spacer and carriage bolt.
Slide the hitch center section between side plates and connect with carriage bolts and nuts.
Torque all 12mm bolts to 82 ft-lb and all 7/16" bolts to 70 ft-lb.
Recommendations for front-mounted accessories to avoid affecting vehicle performance or safety.
Safe practices for vehicle recovery and winching, including anchor point warnings.
Cautionary advice on winch cable angles and their effect on line pull rating.
Specifies hitch weight and installation time for professional and novice installers.
Detailed instructions and diagrams for using the fishwire tool.
Instruction to periodically check fasteners and structural components for tightness and soundness.
| Brand | Curt Manufacturing |
|---|---|
| Model | 31048 |
| Category | Automobile Accessories |
| Language | English |












Loading...