curt 11354 - Hitch Installation and Final Steps; Step 3: Position and Secure Hitch; Step 4: Torque Hardware; Step 5: Installation Complete

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Raise hitch into position. Secure hitch with 1/2"-13 hex flange
nuts onto carriage bolts. Install factory M12 bolts from Step 1
through hitch and into existing vehicle weldnuts.
4. Torque 1/2"-13 hardware to 110 lb-ft and M12-1.50
hardware to 83 lb-ft.
5. Installation is now complete.