curt 18087 User Manual

Item# Qty Description
1 1 Main body rack arms
2 1 Extension rack arms
3 1 Hitch mounting shank
4 4 Support arm
5 4 Support arm
6 2 Locking arm, short (SL,SR)
7 2 Locking arm, long (LL, LR)
8 6 Pan head screw, M6 - 10mm
9 2 Spacer
10 1 Clip
11 1 Anti-rattle bolt set, 1/2" - 96mm
12 1 Shank bolt set, 1/2" - 76mm
13 2 Extension bolt set, 1/2" - 60mm
14 1 Metric wrench
15 1 Allen wrench, M8
16 2 Key set
4 5
6
(SL, SR)
7
(LL, LR)
8 9 10 11 12 13 14
15
16
3
1
2
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
INSTALLATION INSTRUCTIONS
PARTS LIST
TRAY-STYLE BIKE RACK
WARNINGS
This product is not intended for
off-road use, tandems or recumbents.
Do not install on a trailer or other towed vehicle.
Check tightness of all bolts periodically.
Never use bike rack with a hitch extender.
The provided anti-rattle bolt must be threaded
completely through the vehicle's receiver tube and
tightened to 75 ft. lbs. If not completely tightened,
the bike rack can shake, rattle, rock and vibrate.
This could potentially cause damage to the bikes.
PAGE 1 • 18087-INS-RD • 1.800.798.0813 • NEED ASSISTANCE? • CURTMFG.COM

curt 18087 Specifications

General

Brand	curt
Model	18087
Category	Automobile Accessories
Language	English

Summary

WARNINGS

PARTS LIST

ASSEMBLY

Step 1: Hitch Mounting Shank

Connects the main body rack to the hitch shank using bolts and pins.

Step 2: Folding Side Arms

Secures the side arms to the main body rack in a flat position.

Step 3: Attaching Support Arms

Slides support arms onto the main body rack and secures them with tightening knobs.

Step 4: Installing Locking Arms

Attaches locking arms to the middle of the main body rack and secures the center post.

INSTALLATION

ASSEMBLE AND INSTALL 2-BIKE EXTENSION

USE THE BIKE RACK

REAR VEHICLE ACCESS

TRAVEL STORAGE OPTION 1

TRAVEL STORAGE OPTION 2