CURTMFG.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
18112-INS-RB
•
PAGE 1
INSTALLATION MANUAL
18112
Tools Required
Open wrench, 17mm Adjustable wrench
Open wrench, 24mm Socket, 17mm
Torque wrench Hex key, 6mm
Level of Difficulty
Easy
Product Photo
WARNING
Do not carry flammable items on the carrier. Do not allow exhaust fumes
to blow directly on items in the carrier. This is a fire hazard.
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Distribute the weight evenly on the platform when hauling
a load. This carrier is not intended for transporting people.
Do not carry loads wider or deeper than the carrier.
Proper tools will improve the quality of installation and reduce the time required.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Parts List
Qty Description #
1 Bottom bracket 1
4 U-clamp 2
9 Lock nut, M10 3
4 Eye bolt, M10 x 45mm 4
1 Carrier frame 5
1 Fixed plate 6
1 Button socket cap screw,
M10 x 25mm
7
2 Eye bolt, M10 x 20mm 8
1 Flat washer, M10 9
1 Shank assembly 10
1 Hex head bolt, M16 11
1 Lock nut, M16 12
1 Pin 13
2 Clip 14
1 Anti-rattle hitch pin, M16 15
1 Spring washer, M16 16
1 Flat washer, M16 17
2 Button socket cap screw,
M10 x 20mm
18
1 Upper ramp 19
1 Lower ramp 20
Weight Capacities
Weight capacity 500 lbs. 227 kg
Product Registration
CURT Group stands behind our products with industry leading warranties.
You can help us continue to improve our product line and help us understand
your needs by registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king. We value your feedback and we use that information to make
improvements on our products. Please, take a minute and let us know how we are doing.
To Next Page
Need help?
General
