INSTALLATION INSTRUCTIONS
CUSTOM WIRING
CONNECTOR
WIRING LOCATION GUIDEAPPLICATIONS
NOTICE
WARNING
TOOLS NEEDED
Check vehicle owner's manual or contact
the vehicle manufacturer for more information.
Panel trim removal tool
Flat blade screwdriver
Exceeding the product rating can cause loss of warranty,
overheating and potential fire. Do not exceed product rating
or tow vehicle lamp load rating, whichever is lower.
Make Model
Nissan Frontier
Nissan Pathfinder
Nissan Xterra
Suzuki Equator
WARNING: DO NOT EXCEED PRODUCT RATING OR TOW VEHICLE LAMP LOAD RATING, WHICHEVER IS LOWER
SUVS, MINI & FULL-SIZED VANS
(
S
)
Representative vehicle shown below
S5 - Behind driver side rear bumper
S5
All steps must be followed to ensure the wiring connector will
function properly. Once installed, test for proper function by
using a test light or connecting a properly wired trailer.
PAGE 1 • 56226-INS-RB
To Next Page
Need help?
General
