KEY FEATURES/SPECIFICATIONS/SYSTEM REQUIREMENTS FS32
Key Features
• Gold Cup
®
Series – Digital Control Module provides precise control over all aspects of brewing: time,
temperature, volume pre-infusion, pulse-brewing and water bypass.
• Visual Monitoring – Red LED indicator light provides a simple method for at-a-glance coffee freshness
monitoring.
• Silent Tracking System – A red LED light provides an instant visual snapshot of the coffee.
• Fully Automatic – Thermal FreshTrac
®
System starts with every brew cycle and stays with the dispenser. Once
brewing is complete, the dispenser and monitoring system can be moved to any location and the monitoring
system will continue to track freshness time.
• Industry’s most effective mineral tolerant design.
6SHFLÀFDWLRQV6HOHFWHG0RGHOV
(OHFWULFDO6XSSO\5HTXLUHPHQWV
02'(/ '(6&5,37,21 3+$6( 92/76 $036 +($7,1*&21),* :,5( :$776 +(57= *$/+5
$/3*7$ Standard, single voltage 1 PH 220 V 17.3 A 1 x 3500 W 3W + G 3800 W 50/60 Hz 10.0
$/3*7$ Dual voltage 1 PH 120/220 V 15.0/15.0 A 2 x 1450 W 2W/3W + G 1800/3300 W 50/60 Hz 4.5/9.0
'LPHQVLRQV :DWHU6XSSO\5HTXLUHPHQWV
02'(/
+(,*+7
:,'7+ '(37+ 6+,3:(,*+7 6+,3&8%( :$7(5&211(&725 :$7(535(6685( 0,1)/2:5$7(
$/3*7$ 19.13” 9.13” 20.38” 30.0 lbs 3.92 cu ft µÁDUH
20 - 90 psi 1.0 gpm
$/3*7$ 19.13” 9.13” 20.38” 31.0 lbs 3.92 cu ft µÁDUH
20 - 90 psi 1.0 gpm
ALPHA FRESHTRAC KEY FEATURES/SPECS/SYSTEM REQUIREMENTS 101017NC
Following are the factory default settings for the Alpha FreshTrac brewer:
• Energy Save Mode = Off• Brew Temperature = 200°F
• Brew Volume = 60oz. (1.8L)